Overview
Dulux Trade Mouldshield Fungicidal Matt is ideal for most interior walls and ceilings likely be disfigured by mould. Tested to BS 3900 Part G6, it contains a special fungicide which inhibits the growth of fungi and mould inside buildings.
- Antifungal
- Inhibits mould and fungi on walls
- Good durability and adhesion
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Dulux tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.| Area | Interior |
| Recommended Use | Interior walls & ceilings with mould disfigurement |
| Base | Water-Based |
| Coverage | Up to 17m2 per litre |
| Drying Time | Dependent on temperature and humidity |
| Re-Coat Time | 2-4 hours, varying according to temperature and humidity, and longer in cold or damp conditions. |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush, Roller |
| VOC Levels | Low |
| Clean Up | Remove as much product as possible from the equipment before cleaning with water |
Preparation
For best results, ensure surfaces to be painted are sound, clean, and dry.
- Remove and treat any mould, algae, lichen, or moss with Weathershield Multi-Surface Fungicidal Wash.
- Remove all loose and defective paint. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
- Where necessary, wash the surface to remove dirt, grease, and powdery or dusty residues. Rinse with clean water and allow to dry.
- Seal surfaces that remain powdery after thorough preparation with an appropriate .
- Where necessary, rub down and then wipe off with a damp, lint-free cloth to avoid dust.
- Any surface defects should be filled with the appropriate filler.
Application
Stir thoroughly before, we recommend to perform a test patch to ensure you are happy with the finished results.
- Apply using a brush or roller only, this product is not suitable for spraying.
- Do not use when the temperature is below 8°C (as recommended by British Standard BS6150)
- The normal finishing process is 2 full coats, but on previously painted surfaces in good condition, 1 coat may suffice.
Note: Please be aware this is for use as a biocidal paint only we recommend to read all precautions before use.
